Publikasjoner fra CRIStin: Nye registreringer
Viser treff 501-520 av 888
-
High Differential Pressure PEMWE System Laboratory
(Lecture, 2019) -
Butyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoate
(Journal article; Peer reviewed, 2019) -
Passivation Mechanisms of Atomic Layer-deposited AlOx Films and AlOx/SiOx Stack
(Journal article; Peer reviewed, 2019)A new passivation layer of AlOx/SiOx were prepared, in which 80 nm SiOx was prepared by spin-coating perhydropolysilazane (PHPS) and annealed at 450°C. In order to compare the passivation effect of single AlOx layers and ... -
Evolving Soft Matter: Shape, Dynamics and Functionality. The Geilo School 2019, March 11-21, Geilo, Norway
(IFE/E;2019/015, Research report, 2019) -
Concept risk assessment of a hydrogen driven high speed passenger ferry
(Journal article; Peer reviewed, 2019) -
Mechanochemistry of Metal Hydrides: Recent Advances
(Journal article; Peer reviewed, 2019) -
Counting electrons - A new approach to tailor the hydrogen sorption properties of high-entropy alloys
(Journal article; Peer reviewed, 2019) -
A front tracking method for simulation of two-phase interfacial flows on adaptive unstructured meshes for complex geometries
(Journal article; Peer reviewed, 2019) -
Study of hydrogen storage and electrochemical properties of AB2-typeTi0.15Zr0.85La0.03Ni1.2Mn0.7V0.12Fe0.12alloy
(Journal article; Peer reviewed, 2019) -
Two-phase gas-liquid flow in concentric and fully eccentric annuli. Part I: Flow patterns, holdup, slip ratio and pressure gradient
(Journal article; Peer reviewed, 2019)Horizontal and upward low-inclination gas-water and gas-oil flows are investigated using an annulus pipe configuration in a high-pressure system (~400 kPa). The annulus test section, or the so-called pipe-in-pipe configuration, ... -
Cation Ordering and Oxygen Release in LiNi0.5-xMn1.5+ xO4-y (LNMO): In Situ Neutron Diffraction and Performance in Li Ion Full Cells
(Journal article; Peer reviewed, 2019) -
Fixed Bed Reactor Validation of a Mayenite Based Combined Calcium–Copper Material for Hydrogen Production through Ca–Cu Looping
(Journal article; Peer reviewed, 2019) -
In-situ composition analysis of photochromic yttrium oxy-hydride thin films under light illumination
(Journal article; Peer reviewed, 2019) -
A Three-Dimensional Analytical Solution for Reservoir Expansion, Surface Uplift and Caprock Stress Due to Pressurized Reservoirs
(Journal article; Peer reviewed, 2019)An analytical solution is presented for the displacement, strain and stress of a three-dimensional poro-elastic model with three layers, where the three layers are an underburden, a reservoir with a given fluid pressure, ... -
Monitoring of environmental contaminants in freshwater ecosystems 2018 – Occurrence and biomagnification
(NIVA-rapport, Research report, 2019)This report studies the distribution and fate of contaminants such as mercury (Hg), cyclic volatile methylated siloxanes (cVMS: D4, D5, D6), brominated flame retardants (BFR, PBDEs), alkylphenols, organic phosphorous flame ... -
Performance and operating limits of a sorbent-catalyst system for sorption-enhanced reforming (SER) in a fluidized bed reactor
(Journal article; Peer reviewed, 2019) -
Electrochemical Performance of Nitrogen-Doped TiO2 Nanotubes as Electrode Material for Supercapacitor and Li-Ion Battery
(Peer reviewed; Journal article, 2019)Electrochemical anodized titanium dioxide (TiO2) nanotubes are of immense significance as electrochemical energy storage devices owing to their fast electron transfer by reducing the diffusion path and paving way to ... -
Corrosion of armor wire steel in the annulus of flexible pipes at near neutral pH
(Journal article; Peer reviewed, 2019)Stress corrosion cracking (SCC) of carbon steel may occur at near neutral pH in deoxygenated solutions with high bicarbonate concentration. Similar conditions are encountered in the annular space of flexible pipes when it ... -
In-pile tensile creep of chemical vapor deposited silicon carbide at 300 °C
(Journal article; Peer reviewed, 2019) -
Corrosion of candidate materials for use in alkaline water electrolysis
(Journal article; Peer reviewed, 2019)In alkaline water electrolysis the capital expense (CAPEX) of the electrolyzer unit is high and cost reduction, wherever possible, is highly desired. Many parts are made of expensive nickel-based alloys, which in some cases ...